NetLight

Easy Installation and Assembly!

The NetLight is a Visual Device used for alarm conditions such as "Parts Low", "Manitanence Required", etc. The attached control unit connect to Ethernet and receives simple ASCII Commands. Also supported protocols are Telnet, Ping, TCP/IP.

Receives standard Cat5 Cable with RJ-45 Connector.

Finger-safe bayonet locking system with optional set screws

• Heavy duty polycarbonate lenses, bases and caps
• UL Type 4 / 4X / 13 and IP65 environmental ratings
• Four voltages available: 12 & 24V AC/DC and 120V & 240V AC
• Five types of illumination: steady incandescent, flashing incandescent, steady LED, flashing LED, and strobe
• Six lens colors to choose
• Single or dual tone sound module available
• Simple twist and release modules can be removed and replaced while under power
• Horizontal and vertical surface mount base as well pole mount bases available
• Seven pole sizes available from 5cm to 80cm

Patlite Features:

• Size: 60mm diameter.
• Available in 24V AC/DC and 120V AC versions.
• FB types include two selectable, single-tone intermittent alarms with adjustable volume to 90dB (at 1m).
• Colors available: red, yellow, green, blue and clear.
• LED modules are interchangeable and stackable after purchase, up to 5 modules (New shaft purchase is required).
• Units are shipped completely pre-wired and pre-assembled.
• Pole mount version includes 300mm aluminum pole and plastic topmount bracket.
• New Independent Control of individual Light Modules.
• NPN or PNP open collector (24V type), and NPN open collector (120V type).
• All models are CE compliant.
• Meets IP-65 (FB type meets IP-54).
• NEMA Rated: NEMA Type 4, 4X, 13.
• Optional mounting brackets available

Contact Us for more information.